DTC Memory With Vas Pc, Checking
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Warning information for the high voltage system:
Procedures for which the ignition needs to be switched on. Refer to PROCEDURES FOR WHICH THE IGNITION NEEDS TO BE SWITCHED ON .
-- Connect the Vehicle diagnostic tester. Refer to Vehicle Diagnostic Tester, CONNECTING .
-- Perform the following steps on the vehicle diagnostic tester:
- Vehicle - OBD
- Gateway - Device
-- Read the control module with the fault stored in the DTC memory.
-- Continue following the program procedure.
-- Rectify the relevant errors after discussing them with the customer.