Engine Mount, Removing And Installing: Removing: Notes

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi A6 Quattro, 2017 Audi A6, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Support the engine in its installed position. Refer to ENGINE, SUPPORTING IN INSTALLED POSITION .

-- Remove the affected front wheel. Refer to WHEELS AND TIRES .

-- Remove the front noise insulation. Refer to NOISE INSULATION .

-- Remove the corresponding wheel spoiler. Refer to WHEEL HOUSING LINER .

-- Remove the connector -1- for Left Electrohydraulic Engine Mount Solenoid Valve -N144- /Right Electrohydraulic Engine Mount Solenoid Valve -N145- (depending on the transmission) from the bracket and disconnect.

Courtesy of AUDI OF AMERICA, LLC

NOTE:

Ignore item -2-.