Engine Mount
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi A6 Quattro, 2017 Audi A6, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Not Installed
- Bolt
- 20 Nm
- Retaining Plate
- For the engine mount
- If the engine mount is faulty, replace the retaining plate
- Check the retaining plate on the opposite side; replace if necessary
- Not Installed
- Not Installed
- Bolt
- 40 Nm
- Engine Support
- Bolt
- 10 Nm
- Heat Shield
- Bolt
- 90 Nm +90°
- Always replace after removing
- Engine Mount
- Depending on the transmission with the Left Electrohydraulic Engine Mount Solenoid Valve -N144-, Right Electrohydraulic Engine Mount Solenoid Valve -N145-
- Removing and installing. Refer to ENGINE MOUNT, REMOVING AND INSTALLING .
- Subframe
- Bolt
- 55 Nm