Fuel Level Sensor 2 -G169-, Connector Assignment

WARNING: This page is about a different variant/trim than selected.

The Fuel Level Sensor 2 is at the left under the rear seat bench.

Fig 1: Identifying Cover From Fuel Delivery Unit

Courtesy of AUDI OF AMERICA, LLC

Procedure

-- Remove rear seat bench. Refer to Removal and Installation .

-- Unclip left locking flange cover retaining tabs -arrows-.

-- Disconnect electrical connector -1- on locking flange.

Fig 2: Haldex Clutch Electrical Connector And Connector At Locking Flange

Courtesy of AUDI OF AMERICA, LLC

NOTE:

Disregard item -2-.

3-pin connector assignment on Fuel Level Sensor 2 -G169-

Fig 3: Identifying 3-Pin Connector

Courtesy of AUDI OF AMERICA, LLC

Fuel Level Sensor 2 -G169- ground (sensor ground)
Wire connection from Fuel Level Sensor -G- -G- to instrument cluster (fuel gauge)
Tank sensor total resistance