LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 2013 >> A4 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 1217 (Wiper/Washer Systems) >> 92 Wiper/Washer Systems >> Windshield Washer System >> Windshield Washer Fluid Reservoir, Removing And Installing >> Windshield Washer Fluid Reservoir, Removing And Installing >> Installing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Windshield Washer Fluid Reservoir, Removing And Installing: Installing

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

-- Both elbow connections -5- for the Windshield and Rear Window Washer Pump -V59- are color coded and must be matched with the same connections when being installed.

Fig 1: Identifying Connectors For Windshield And Rear Window Washer Pumps
GWWN92-10537Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the guide pin -1- on the windshield washer fluid reservoir into the opening -2- in the body.

Fig 2: Identifying Guide Pin -1- And Opening -2- In Body
GWWN92-10538Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Tighten the bolts to the specification given in the assembly overview. Refer to OVERVIEW - WINDSHIELD WASHER SYSTEM .

-- Bleed headlamp washer system after completing assembly work. Refer to HEADLAMP WASHER SYSTEM, BLEEDING .