New Control Module, Installing

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

WARNING:

Excessive shaking (for example, dropping, impact) may destroy the control module. The control module must then no longer be used.

Surface must be cleaned before assembling.

NOTE:

Use new bolts.

A new control module may be installed a maximum of two times on a used hydraulic unit, to ensure that the elastic seal, seals sufficiently.

Do not install a used control module.

-- Carefully slide the control module without tilting it onto the hydraulic unit.

-- Tighten the hydraulic unit and control module diagonally and in stages to the tightening specification using the new accompanying TORX^® socket bolts.