Laser Distance Regulation Control Module -J1122-, REMOVING AND INSTALLING: Installing
WARNING: This page is about a different car, the 2021 Audi e-tron Quattro and 2019 Audi e-tron Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and note the following:
-- Check the connector for damage, contact corrosion and water ingress, and service if necessary. Refer to CONNECTOR HOUSINGS AND CONNECTORS, REPAIRING .
-- Calibrate the laser distance regulation control module after installing. Refer to LASER SENSOR (Laser Distance Regulation Control Module -J1122-), ADJUSTING .