Rear Peripheral Camera -R246-, REMOVING AND INSTALLING
WARNING: This page is about a different car, the 2021 Audi e-tron Quattro and 2019 Audi e-tron Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Component location. Refer to COMPONENT LOCATION OVERVIEW - SENSORS AND CONTROL MODULES IN REAR SECTION OF VEHICLE .
The Rear Peripheral Camera - R246- is integrated in the Release Button in Rear Lid Handle -E234- and cannot be replaced separately.
If faulty, the entire Release Button in Rear Lid Handle - E234- must be replaced with the peripheral camera. Refer to COMPONENT LOCATION OVERVIEW - CONTROLS IN LUGGAGE COMPARTMENT .
-- Calibrate the peripheral camera after installation. Refer to PERIPHERAL CAMERA, CALIBRATING .