Catalyst Monitor Sensor: Removal
WARNING: This page is about a different car, the 2016 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
Left Hand Catalyst Monitor Sensor(CMS)
- 1.
With the vehicle in NEUTRAL, position it on a hoist. Refer to Jacking and Lifting .
- 4.
Using the Exhaust Gas Oxygen Sensor Socket, remove the LH CMS.- Apply penetrating lubricant to the CMS to assist in removal.
Right Hand Catalyst Monitor Sensor(CMS)
- 5.
With the vehicle in NEUTRAL, position it on a hoist. Refer to Jacking and Lifting .
- 8.
Using the Exhaust Gas Oxygen Sensor Socket, remove the RH CMS.- Apply penetrating lubricant to the CMS to assist in removal.