Hydraulic Unit With Control Module, Removing And Installing: Notes
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S6, 2015 Audi A6 Quattro, 2015 Audi A6, 2014 Audi S6, and 2014 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Vehicle Diagnostic Tester
- Brake Pedal Actuator VAG 1869/2.
- Sealing plug repair set, part no. 1H0 698, 311A
NOTE:
To remove the hydraulic unit with control module, loosen the coolant expansion tank and secure it at the side. Do not open the coolant hoses.
The hydraulic unit -2- with the control module -3- and electric connection -1- is inside the engine compartment, in the front and on the left side under the coolant reservoir.