Windshield Projection Head Up Display Control Module -J898-, CALIBRATING: Notes
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S6, 2015 Audi A6 Quattro, 2015 Audi A6, 2014 Audi S6, and 2014 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Head-Up Display Calibration Board Audi A6 VAS 6657
-- The windshield projection head up display control module -J898- must be calibrated using the Vehicle Diagnostic Tester in Guided Fault Finding:
- The windshield projection head up display control module was replaced.
- The windshield was removed and installed.
- The DTC no or incorrect basic setting/adaptation is stored in the DTC memory.