Windshield Projection Head Up Display Control Module -J898-: Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S6, 2015 Audi A6 Quattro, 2015 Audi A6, 2014 Audi S6, and 2014 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Tightening specification, refer to WINDSHIELD PROJECTION CONTROL MODULE OVERVIEW .

Install in reverse order of removal. Note the following:

-- Install the control module and tighten the screws.

-- Mount the windshield and secure it - do not bond it.

-- Turn on the ignition and check the control module function.

A number must be appear on the windshield.

-- Install the windshield. Refer to WINDSHIELD .

-- Install the upper instrument panel cover. Refer to INSTRUMENT PANEL COVER, UPPER .

-- Calibrate the windshield projection control module. Refer to Windshield Projection Head Up Display Control Module -J898-, CALIBRATING .

-- Install the windshield projection control module cover. Refer to WINDSHIELD PROJECTION HEAD UP DISPLAY CONTROL MODULE -J898- .