Windshield Projection Head Up Display Control Module -J898-: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S6, 2015 Audi A6 Quattro, 2015 Audi A6, 2014 Audi S6, and 2014 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Windshield Projection Head Up Display Control Module, Screws And Connector

Courtesy of AUDI OF AMERICA, LLC

-- Remove the upper cover. Refer to INSTRUMENT PANEL COVER, UPPER .

-- Cover the control module -3- with a soft towel.

-- Remove the windshield. Refer to WINDSHIELD .

-- Remove the bolts -1, 2 and 5-.

-- Lift the control module slightly and disconnect the connector -4-.

-- Remove the control module.