Night Vision System Control Module, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S6, 2015 Audi A6 Quattro, 2015 Audi A6, 2014 Audi S6, and 2014 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Turn off the ignition and all electrical consumers and remove the ignition key.

-- Loosen the front left seat and with the wires still attached and push rearward. Refer to 72 SEAT FRAMES .

-- Remove the floor mat.

-- Remove the sill panel. Refer to PASSENGER SIDE INSTRUMENT PANEL VENT .

-- Remove the foot rest. Refer to FOOT REST .

-- Disengage the carpet and push aside.

-- Release the clips in the direction of the -arrow-.

Fig 1: Releasing Clips

Courtesy of AUDI OF AMERICA, LLC

-- Open cover -1-.

-- Push the retaining tab in the direction of the -arrow- and remove the Night Vision System Control Module - J853- -3- from the E-box.

Fig 2: Removing Night Vision System Control Module - J853-

Courtesy of AUDI OF AMERICA, LLC

-- Release connectors -1- and -2- and remove from the Night Vision System Control Module - J853- -3-

First release connector -2- and then -1-.