Chip Card Reader Control Module, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S6, 2015 Audi A6 Quattro, 2015 Audi A6, 2014 Audi S6, and 2014 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Turn off the ignition and all electrical consumers and remove the ignition key.

-- Open the glove compartment.

-- Remove the chip card.

-- Slide the Chip Card Reader Control Module -J676- -1- back until it can be removed from the trim.

Fig 1: Identifying Chip Card Reader Control Module

Courtesy of AUDI OF AMERICA, LLC

-- Remove the clip -4-.

-- Release and disconnect the connector -3- from the Chip Card Reader Control Module -J676- -1-.