LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 2013 >> S7 >> Repair and Diagnosis >> External Pages >> Different car >> Section 87 (Communication) >> 91 Communication >> Navigation System >> Connector Assignments >> Chip Card Reader Control Module -J676- CONNECTOR ASSIGNMENT, FROM MY 2015
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Chip Card Reader Control Module -J676- CONNECTOR ASSIGNMENT, FROM MY 2015

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S6, 2015 Audi A6 Quattro, 2015 Audi A6, 2014 Audi S6, and 2014 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Chip Card Reader Control Module -J676-
GWWA91-12293Courtesy of AUDI OF AMERICA, LLC
  1. 5-Pin Connector -T5br- to the front External Audio Source Connection -R199-, USB quantity: 2, AUX IN
  2. 10-Pin Connector - T10bk-
  3. Connection from the Close Range Communication Antenna -R269-
Fig 2: Identifying 4-Pin Connector -T4en-
GWWA91-12098Courtesy of AUDI OF AMERICA, LLC

All pins are connected to the External Audio Source Connection -R199-.

  1. Data (+)
  2. USB, +5 V
  3. Data (-)
  4. USB, ground
  5. Ground Shielding
Fig 3: 10-Pin Connector - T10bk-
GWWA91-11317Courtesy of AUDI OF AMERICA, LLC
  1. Supply (+) Traffic Data Antenna -R173-
  2. Supply (-) Traffic Data Antenna -R173-
  3. VICS data wire to the Traffic Data Antenna -R173-
  4. VICS data wire from the Traffic Data Antenna -R173-
  5. Not Assigned
  6. Not Assigned
  7. Diagnosis 1 Traffic Data Antenna -R173-
  8. Diagnosis 2 Traffic Data Antenna -R173-
  9. Terminal 30
  10. Terminal 31