LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 2013 >> S8 >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Fuel System >> 4.0L - Ignition/Glow Plug System - Engine Code(S): CEUA, CGTA, CTFA & CTGA >> 28 Ignition/Glow Plug System >> Ignition System >> Knock Sensor, Removing And Installing >> Knock Sensor 1 -G61-, Removing And Installing >> Installing
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Knock Sensor 1 -G61-, Removing And Installing: Installing

Install in reverse order of removal. Note the following:

NOTE:

The tightening specification influences the function of the knock sensor.

-- Install the Oil Pressure Switch/Reduced Oil Pressure Switch -F22- / -F378-, refer to OIL PRESSURE SWITCH -F22- / REDUCED OIL PRESSURE SWITCH -F378-, REMOVING AND INSTALLING .

-- Install the ribbed belt tensioner, refer to RIBBED BELT TENSIONER, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals