Specifications Index

SPECIFICATIONS INDEX

System			Specification/Procedure
Air Conditioning
Service			A/C SYSTEM, GENERAL INFORMATION
Torque			Refer to the appropriate procedure in OVERVIEW - A/C COMPRESSOR POWER UNIT
Axle Nut/Hub Nut
Front			200 Nm +180°
Rear			200 Nm +180°
Battery			BATTERY
Brakes
Bleeding Sequence			HYDRAULIC SYSTEM, STANDARD BLEEDING (As of 2014)
Disc Brakes			BRAKE SYSTEM - GENERAL & TECHNICAL DATA (AS OF 01.2014)
Torque			Refer to the appropriate procedures, Hydraulic Components 47 HYDRAULIC COMPONENTS Mechanical Components FRONT BRAKES / REAR BRAKES
Charging
Generator			GENERATOR
Torque			OVERVIEW - GENERATOR
Drive Belts
Adjustment
2.0L			RIBBED BELT, REMOVING AND INSTALLING
Belt Routing
		2.0L	OVERVIEW - CYLINDER BLOCK, BELT PULLEY SIDE
Engine Cooling
General Service Specifications			Refer to the appropriate FLUID CAPACITY TABLES information.
Radiator Cap Pressure
	Blue Cap		1.4 to 1.6 bar (20.30 to 23.20 psi)
	Black Cap		1.6 to 1.8 bar (23.2 to 26.1 psi)
Thermostat R & I
2.0L			OVERVIEW - COOLANT PUMP/THERMOSTAT
Water Pump R & I
2.0L			COOLANT PUMP, REMOVING AND INSTALLING
Engine Mechanical
2.0L
		Compression	COMPRESSION PRESSURE, CHECKING
Oil Pressure			OIL FILTER/OIL PRESSURE SWITCH
Overhaul			10 ENGINE ASSEMBLY , 13 CRANKSHAFT, CYLINDER BLOCK and 15 CYLINDER HEAD, VALVETRAIN
Torque			10 ENGINE ASSEMBLY , 13 CRANKSHAFT, CYLINDER BLOCK and 15 CYLINDER HEAD, VALVETRAIN
Fluid Specifications			See FLUIDS under MAINTENANCE tab.
Engine Oil Drain Plug			30Nm
Flywheel/Flex Plate Torque			60 Nm + 90°
Fuel System
Fuel Pressure Test Procedure
	2.0L		TRANSFER FUEL PUMP -G6-, CHECKING
Ignition
Firing Order & Cylinder Identification			FIRING ORDER & CYLINDER IDENTIFICATION
Spark Plug
2.0L			06H 905 601 A 06H 905 611
Starting
Starter			STARTER
Torque			OVERVIEW - STARTER
Wheel Alignment
Adjustment Specifications			AXLE ALIGNMENT PROCEDURE
Torque			40 FRONT SUSPENSION 42 REAR SUSPENSION
Wheel & Tire
Wheel Lug Nut Torque			120 Nm