LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 2014 >> A4 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 1120 (Abs Guided Routine Testing) >> Pinpoint Tests >> Pinpoint Test AF: ABS Module VIN Mismatch >> Normal Operation and Fault Conditions
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Normal Operation and Fault Conditions

WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.

When the ignition is set to RUN, the ABS module and the BCM share VIN information through the GWM over the HS-CAN1 and HS-CAN2. If the ABS module has a different VIN than the BCM, this DTCs sets. 

PPT AF ABS MODULE DTC FAULT TRIGGER CONDITIONS

DTC Description Fault Trigger Conditions
U3002:62 Vehicle Identification Number: Signal Compare Failure Sets when the VIN message sent by the BCM, through the GWM and over the HS-CAN does not match the VIN stored in the ABS module.