Inspection Of Switch Unit
WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the remote control back rest switch connector.
- Measure the resistance between terminals of remote control back rest switch connector.
Connector & terminal
RH side:
(R172) No. 5 - (R172) No. 1:
LH side:
(R173) No. 5 - (R173) No. 1:
Is the resistance less than 10 Ω when the switch is ON?
- Yes → Normal operation.
- No → Replace the switch.