LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 2015 >> R8 Plus, Automatic DCT Trans >> Repair and Diagnosis >> General Information >> Reset Procedures >> ATEQ TPMS Reset Procedure >> ATEQ TPMS Reset Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

ATEQ TPMS Reset Procedure

NOTE: On Audi vehicles, the TPMS3 cannot be used to register the TPMS sensors, or reset the TPMS.
  1. Adjust tire pressures to specified value.
  2. Turn on the ignition.
  3. Select the menu: Set -> Tire Pressure -> Wheel Change.
  4. "Confirm" to begin the initialization process.
  5. Message appears "Wheel sensors are being initialized. This may take a few minutes"
scientia non olet · About LEMON Manuals