Peripheral Camera Control Module -J928- CONNECTOR ASSIGNMENT

WARNING: This page is about a different car, the 2015 Audi A7 Quattro and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Peripheral camera control module -J928-

Courtesy of AUDI OF AMERICA, LLC

18-Pin Connector -T18f-
CVBS output to the Information Electronics Control Module 1 -J794-
CVBS input from Left Peripheral Camera -R244-
CVBS input from Right Peripheral Camera -R245-
CVBS input from Front Peripheral Camera -R243-
CVBS input from Rear Peripheral Camera -R246-

NOTE:

Unlisted connector terminals are not assigned.

Fig 2: 1 - 18-pin connector (T18f)

Courtesy of AUDI OF AMERICA, LLC

1 - Terminal 30

2 - Convenience CAN bus high

10 - Convenience CAN bus low

12 - Terminal 31

Fig 3: FBAS input

Courtesy of AUDI OF AMERICA, LLC

Power
LVDS (-)
LIN
LVDS (+)