Windshield Projection Head Up Display Control Module, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi S8, 2018 Audi A8 Quattro, 2017 Audi S8, 2017 Audi A8 Quattro, and 2016 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
-- Install the control module and tighten the screws.
-- Mount the windshield and secure it - do not bond it.
-- Turn on the ignition and check the control module function.
- A number must be appear on the windshield.
-- Install the windshield. Refer to Windshield, Removing and Installing .
-- Calibrate the windshield projection control module. Refer to WINDSHIELD PROJECTION HEAD UP DISPLAY CONTROL MODULE, CALIBRATING .