Windshield Projection Head Up Display Control Module, Removing And Installing: Notes

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi S8, 2018 Audi A8 Quattro, 2017 Audi S8, 2017 Audi A8 Quattro, and 2016 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

Danger of causing damage.

Remove only the marked screws from the Windshield Projection Head Up Display Control Module -J898-.
The Windshield Projection Head Up Display Control Module -J898- must be replaced if the screws are removed from the housing upper section.
If the Windshield Projection Head Up Display Control Module -J898- should fall down, it must be replaced because the inner components will get damaged even though there is no damage on the outside.
Do not place any force on the upper section of the Windshield Projection Head Up Display Control Module -J898- housing. Otherwise the Windshield Projection Head Up Display Control Module -J898- will have to be replaced.