Windshield Projection Head Up Display Control Module, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi S8, 2018 Audi A8 Quattro, 2017 Audi S8, 2017 Audi A8 Quattro, and 2016 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the upper cover. Refer to Overview - Instrument Panel Assembly .

-- Cover the control module -3- with a soft towel.

Fig 1: Identifying Windshield Projection Head Up Display Control Module, Screws And Connector

Courtesy of AUDI OF AMERICA, LLC

-- Remove the windshield. Refer to Windshield, Removing and Installing .

-- Remove the bolts -1, 2 and 5-.

-- Lift the control module slightly and disconnect the connector -4-.

-- Remove the control module.