Accelerator Pedal Module - GX2-, Checking

General Description 

The Accelerator Pedal Position Sensor -G79- and Accelerator Pedal Position Sensor 2 -G185- are combined in one component and integrated into the Accelerator Pedal Module - GX2-. They are used to detect the position of the accelerator pedal throughout the entire adjustment range. The Engine Control Module - J623- detects the driver's request from these signals and uses them to calculate the injection quantity and EPC Throttle valve operation.

The Accelerator Pedal Module - GX2- contains the following components:

• Accelerator Pedal Position Sensor -G79-
• Accelerator Pedal Position Sensor 2 -G185-

The Accelerator Pedal Module - GX2- components cannot be serviced separately, and they must be serviced as a unit.

Special tools and workshop equipment required 

• Multimeter.
• Scan Tool.

Test requirements 

• Fuses OK.
• Battery voltage OK.
• Switch OFF all electrical and electronic accessories.
• Vehicles with automatic transmission, ensure the selector lever position is in "P".
• Vehicles with manual transmission, ensure the shifter lever position is in "N" with the parking brake applied.
• Observe all safety precautions: SAFETY PRECAUTIONS .
• View clean working conditions: CLEAN WORKING CONDITIONS .

Test Procedure