Hydraulic Unit With Control Module, Removing And Installing, Hybrid Vehicles: Notes
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Vehicle Diagnostic Tester
- Brake Pedal Actuator VAG 1869/2.
- Sealing plug repair set, part no. 1H0 698, 311A
WARNING:
Follow the High Voltage System General Warnings.
NOTE:
The hydraulic unit -1- with the control module -3- and electric connection -2- is inside the engine compartment, in the front and on the left side under the coolant reservoir.
To remove the hydraulic unit with control module, loosen the coolant expansion tank and secure it at the side. Do not open the coolant hoses.