Seat Trim/Control Module/Compressor Bracket, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2021 Audi S8, 2021 Audi A8 e Quattro, 2021 Audi A8 Quattro, 2020 Audi S8, and 2020 Audi A8 e Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Insert the bracket for the trim -arrows-. When doing this, make sure the tabs -1- fit into the brackets -2, 3 and 4-.
Further installation is performed in reverse order of removal, while noting the following:
-- Install the front seat. Refer to Installing .