Information Electronics Control Module 2 -J829- CONNECTOR ASSIGNMENT
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2015 Audi S8, 2015 Audi A8 Quattro, 2014 Audi S8, 2014 Audi A8 Quattro, and 2013 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.
- Connection Block with Four Connectors
- MOST bus
- CVBS input from the DVD Changer -R161-
- 4-Pin Connector -T4ck- to the Multimedia Display Unit 1 -Y22-, left
- 4-Pin Connector -T4ci- to the External Audio Source Connection 2 -R231-
- 4-Pin Connector -T4ch- to the Multimedia Display Unit 2 -Y23-, right
NOTE:
Unlisted connector terminals are not used.
1 - Connection Block with Four Connectors
3 - Wake UP to the Multimedia Control Head 2 -E499-
6 - Res MU to Multimedia Control Head 2 -E499-
7 - Ring-break Diagnostic Cable
5 - FBAS wire (-) from the TV Tuner -R78-
11 - FBAS wire (+) from the TV Tuner -R78-
All pins are connected to the External Audio Source Connection 2 -R231-.
- LF-In ground
- Right LF-In
- USB (+5V)
- USB (ground)
- Ground
- Detect
- Left LF-In
- LF-In ground shielding
- CVBS cable (+)
- CVBS cable (-)
- iPod data
- iPod data
10 - Multimedia Control Head 2 -E499- data
11 - Data to Multimedia Control Head 2 -E499-
12 - Terminal 31
14 - Res BT from Multimedia Control Head 2 -E499-
15 - Terminal 30
- IN
- OUT
All pins are connected to the Multimedia Display Unit 1 -Y22-.
- LVDS (-)
- LIN
- LVDS (+)
- Ground
All pins are connected to the External Audio Source Connection 2 -R231-.
- D (+)
- iPod recognized
- D (-)
- Ground
All pins are connected to the Multimedia Display Unit 2 -Y23-.
- LVDS (-)
- LIN
- LVDS (+)
- Ground