Chip Card Reader Control Module, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2015 Audi S8, 2015 Audi A8 Quattro, 2014 Audi S8, 2014 Audi A8 Quattro, and 2013 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.
-- Install in reverse order of removal. Note the following:
-- Connect the connector -3- and then push the clip -4- through the opening.
-- Make sure the tabs on the Chip Card Reader Control Module -J676- engage into the trim.