Chip Card Reader Control Module, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2015 Audi S8, 2015 Audi A8 Quattro, 2014 Audi S8, 2014 Audi A8 Quattro, and 2013 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.
-- Open the glove compartment.
-- Remove the chip card.
-- Slide the Chip Card Reader Control Module -J676- -1- back in the direction of -arrow- until it can be removed from the trim -2-.
-- Remove the clip -4-.
-- Release and disconnect the connector -3- from the Chip Card Reader Control Module -J676- -1-.