LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 2016 >> S8 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 590 (Communication) >> 91 Communication >> Peripheral Camera >> Peripheral Camera Control Module -J928- CONNECTOR ASSIGNMENT
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Peripheral Camera Control Module -J928- CONNECTOR ASSIGNMENT

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2015 Audi S8, 2015 Audi A8 Quattro, 2014 Audi S8, 2014 Audi A8 Quattro, and 2013 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Peripheral Camera Control Module -J928-
GWWA91-11890Courtesy of AUDI OF AMERICA, LLC
  1. 18-Pin Connector -T18f-
  2. CVBS output (T21t) to Information Electronics Control Module 1 -J794-
  3. CVBS input (T5av) from Left Peripheral Camera -R244-
  4. CVBS input (T5aw) from Right Peripheral Camera -R245-
  5. CVBS input (T5ax) from Front Peripheral Camera -R243-
  6. CVBS input (T5ay) from Rear Peripheral Camera -R246-
NOTE:

Unlisted connector terminals are not used.

Fig 2: 1 - 18-pin connector (T18f)
GWWA91-11894Courtesy of AUDI OF AMERICA, LLC

1 - Terminal 30

2 - CAN bus high,

10 - CAN bus low, Comfort

12 - Terminal 31

Fig 3: FBAS Input
GWWA91-11895Courtesy of AUDI OF AMERICA, LLC
  1. Power
  2. LVDS (-)
  3. LIN
  4. LVDS (+)