Information Electronics Control Module 1 -J794-, REMOVING AND INSTALLING: Installing
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2021 Audi S8, 2021 Audi A8 e Quattro, 2021 Audi A8 Quattro, 2020 Audi S8, and 2020 Audi A8 e Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and note the following:
-- First insert the Information Electronics Control Module 1 -J794- into the bracket until it engages.
-- Connect all connectors.
-- Engage the rear bracket -2- (refer to -3-) and secure with three screws.
If the Information Electronics Control Module 1 - J794- is replaced, the following procedure applies:
-- Connect the Vehicle Diagnostic Tester.
Replacing the Information Electronics Control Module 1 -J794-
-- Select the Diagnostic mode and start the diagnosis.
-- Select the Test plan tab.
-- Select the Select individual test button and select the following tree structure consecutively:
- Diagnostic-capable systems
- 005F - Information Electronics Control Module 1 - J794
- 005F - Information Electronics Control Module 1, functions
- 005F - Replace control module -J794