Sensor Electronics Control Module, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2015 Audi S8, 2015 Audi A8 Quattro, 2014 Audi S8, 2014 Audi A8 Quattro, and 2013 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
CAUTION:
Risk of destroying the Sensor Electronics Control Module -J849-.
- Protect the Sensor Electronics Control Module -J849- from bumps or impact: A Sensor Electronics Control Module -J849- that has fallen to the ground can no longer be used.
-- Ensure a stress-free seating on the mounting.
NOTE:
To install the Sensor Electronics Control Module -J849- -2- free of tension, first install all the nuts -1- loosely and then tighten them diagonally.
-- If the Sensor Electronics Control Module -J849- is being replaced, select the "Replace" function for the Sensor Electronics Control Module -J849- using the Vehicle Diagnostic Tester in Guided Functions .