Windshield Projection Head Up Display Control Module, Removing And Installing: Notes

Danger Of Causing Damage.

• Remove only the marked bolts from the Windshield Projection Head Up Display Control Module -J898-.
• The Windshield Projection Head Up Display Control Module -J898- must be replaced if the bolts are removed from the housing upper section.
• If the Windshield Projection Head Up Display Control Module -J898- should fall down, it must be replaced because the inner components will get damaged even though there is no damage on the outside.
• Do not place any force on the upper section of the Windshield Projection Head Up Display Control Module -J898- housing. Otherwise the Windshield Projection Head Up Display Control Module -J898- will have to be replaced.