ABS Control Module -J104- WITH ABS Hydraulic Unit -N55-, REMOVING AND INSTALLING: Notes

Special tools and workshop equipment required

Brake Pedal Actuator:VAG1869/2 .
Container -1- from the Brake Charger/Bleeder Unit:VAS5234
Plugs from Repair Kit:1H0 698 311 A

If the ABS Control Module -J104- is faulty, it can be replaced separately. Refer to CONTROL MODULE, SEPARATING FROM HYDRAULIC UNIT .

If the ABS Hydraulic Unit -N55- is faulty, it must be replaced together with the ABS Control Module -J104-.

NOTE:

If the control module is being replaced, select the "Replace" function for the respective control module in "Guided Functions" . Refer to Vehicle Diagnostic Tester.

Refer to CONTROL MODULE, SEPARATING FROM HYDRAULIC UNIT