Specifications Index

SPECIFICATIONS INDEX

System		Specification/Procedure
Air Conditioning
Service		WORKING WITH A/C SERVICE STATION (R1234yf) or A/C SYSTEM, GENERAL INFORMATION (R134a)
Torque		Refer to the appropriate procedure OVERVIEW - A/C COMPRESSOR POWER UNIT
Axle Nut/Hub Nut
Front		200 Nm +180°
Rear		WHT.005.437 / black = 200 Nm +180° WHT.005.437.A / silver = 200 Nm + 90°
Battery		BATTERY
Brakes
Bleeding Sequence		HYDRAULIC SYSTEM, BLEEDING
Disc Brakes		FRONT BRAKES TECHNICAL DATA , or Rear Brakes Technical Data
Torque		Refer to the appropriate procedures in: 47 HYDRAULIC COMPONENTS , FRONT BRAKES or REAR BRAKES
Charging
Generator		GENERATOR
Torque		Refer to the appropriate procedure OVERVIEW - GENERATOR
Drive Belts
Adjustment
2.0L		RIBBED BELT, REMOVING AND INSTALLING (AS OF 09.2016) RIBBED BELT, REMOVING AND INSTALLING (AS OF 12.2017) RIBBED BELT, REMOVING AND INSTALLING (AS OF 01.2018)
Belt Routing
2.0L		OVERVIEW - CYLINDER BLOCK, BELT PULLEY SIDE (AS OF 09.2016) OVERVIEW - CYLINDER BLOCK, BELT PULLEY SIDE (AS OF 12.2017) OVERVIEW - CYLINDER BLOCK, BELT PULLEY SIDE (AS OF 01.2018)
Engine Cooling
General Service Specifications		Refer to the appropriate FLUID CAPACITY TABLES information.
Radiator Cap Pressure
2.0L		Blue Cap 1.4 to 1.6 bar (20.3 to 23.2 psi) Black Cap 1.6 to 1.8 bar (23.2 to 26.1 psi)
Thermostat R & I
2.0L		COOLANT THERMOSTAT, REMOVING AND INSTALLING (AS OF 09.2016) OVERVIEW - COOLANT PUMP/COOLANT THERMOSTAT (AS OF 12.2017) COOLANT THERMOSTAT, REMOVING AND INSTALLING (AS OF 01.2018)
Water Pump R & I
2.0L		COOLANT PUMP, REMOVING AND INSTALLING (AS OF 09.2016) COOLANT PUMP, REMOVING AND INSTALLING (AS OF 12.2017) COOLANT PUMP, REMOVING AND INSTALLING (AS OF 01.2018)
Engine Mechanical
2.0L
	Compression	COMPRESSION PRESSURE, CHECKING (AS OF 09.2016) COMPRESSION, CHECKING (AS OF 12.2017) COMPRESSION, CHECKING (AS OF 01.2018)
	Oil Pressure	OIL PRESSURE AND OIL PRESSURE SWITCH -F1-, CHECKING, ENGINE CODE CCTA (AS OF 09.2016) OIL PRESSURE, CHECKING (AS OF 12.2017) OIL PRESSURE AND OIL PRESSURE SWITCH, CHECKING (AS OF 01.2018)
	Engine Oil Drain Plug	30Nm
	Overhaul	(AS OF 09.2016) 10 ENGINE ASSEMBLY , 13 CRANKSHAFT, CYLINDER BLOCK and 15 CYLINDER HEAD, VALVETRAIN (AS OF 12.2017) 10 ENGINE ASSEMBLY , 13 CRANKSHAFT, CYLINDER BLOCK and 15 CYLINDER HEAD, VALVETRAIN (AS OF 01.2018) 10 ENGINE ASSEMBLY , 13 CRANKSHAFT, CYLINDER BLOCK and 15 CYLINDER HEAD, VALVETRAIN
	Torque	(AS OF 09.2016) Refer to the appropriate procedures 10 ENGINE ASSEMBLY , 13 CRANKSHAFT, CYLINDER BLOCK or 15 CYLINDER HEAD, VALVETRAIN (AS OF 12.2017) 10 ENGINE ASSEMBLY , 13 CRANKSHAFT, CYLINDER BLOCK or 15 CYLINDER HEAD, VALVETRAIN (AS OF 01.2018) 10 ENGINE ASSEMBLY , 13 CRANKSHAFT, CYLINDER BLOCK or 15 CYLINDER HEAD, VALVETRAIN
Fluid Specifications		Refer to the appropriate Maintenance service information.
Flywheel/Flex Plate Torque		60 Nm + 90°
Fuel System
Pressure Specification
Fuel Pressure Test Procedure
2.0L		TRANSFER FUEL PUMP -G6-, CHECKING
Ignition
Firing Order & Cylinder Identification		FIRING ORDER & CYLINDER IDENTIFICATION
Ignition Wires (Resistance)		Coil-On-Plug
Ignition Wires (Routing)		Coil-On-Plug
Spark Plug
2.0L Engine		Beru Type 06H 905 621 A NGK Type 06H 905 601 A
Starting
Starter		STARTER
Torque		OVERVIEW - STARTER
Wheel Alignment
Adjustment Specifications		AXLE ALIGNMENT
Torque		40 FRONT SUSPENSION 42 REAR SUSPENSION
Wheel & Tire
Wheel Lug Nut Torque		103 Ft. Lbs (140 Nm)