Chip Card Reader Control Module -J676-

Chip Card Reader Control Module J676 

Fig 1: Chip Card Reader Control Module -J676-

Courtesy of AUDI OF AMERICA, LLC

1. 4-Pin Connector -T4ac- for Information Electronics Control Module 1 -J794- /USB Distributor -R293-
2. 10-Pin Connector - T10z-
3. Connection from the Near Field Communication Antenna -R269-

1 - 4-Pin Connector T4ac

Fig 2: 1 - 5-Pin Connector -T5-

Courtesy of AUDI OF AMERICA, LLC

All pins are connected to the Information Electronics Control Module 1 -J794- /USB Distributor -R293-.

1. Data (+)
2. Supply, +5 V
3. Data (-)
4. Ground

2 - 10-Pin Connector T10z

Fig 3: 10-Pin Connector - T10bk-

Courtesy of AUDI OF AMERICA, LLC

1. Supply (+) Traffic Data Antenna -R173-
2. Supply (-) Traffic Data Antenna -R173-
3. Data to the Traffic Data Antenna -R173-
4. Data from the Traffic Data Antenna -R173-
5. Not Assigned
6. Switch-On Signal from Information Electronics Control Module 1 -J794-
7. Diagnosis 1 Traffic Data Antenna -R173-
8. Diagnosis 2 Traffic Data Antenna -R173-
9. Supply (+) Chip Card Reader Control Module -J676-
10. Supply (-) Chip Card Reader Control Module -J676-