Procedure Version 1

-- Select the required "Guided Function"  . The entry in the Vehicle Diagnostic Tester is always the same.

-- Connect the Vehicle Diagnostic Tester.

-- Select Diagnostic  operating mode and Start diagnostics  .

-- Select the Select individual test  tab and select the following tree structure consecutively:

Adapting the adaptation values after replacing components

• Drivetrain 
• Select the engine code and engine 
• 0001 - OBD-capable systems 
• 0001 - Engine Electronics 
• 0001 - Engine electronics, functions 

Replacing the engine/motor control module:

• 0001 - Replacing the engine control module 

-- Start the selected program and follow the instructions on the Vehicle Diagnostic Tester display.