Procedure Version 2

Adapting the adaptation values after replacing components

-- Select the required Guided Function"  . The entry in the Vehicle Diagnostic Tester is always the same.

-- Connect the Vehicle Diagnostic Tester.

-- Select Diagnostic  operating mode and Start diagnostics  .

-- Select the Select individual test  tab and select the following tree structure consecutively:

• Diagnostic-capable systems 
• 0001 - Engine Electronics 
• 0001 - Engine electronics, functions 
• 0001 - Step after replacing components 

Replacing the engine/motor control module:

• 0001 - Replacing the engine control module 
• Start the selected program and follow the instructions on the Vehicle Diagnostic Tester display.