Calibrating Procedure
The Vehicle Diagnostic Tester is connected.
- Select the Diagnostic mode and start the diagnosis.
- Select the test plan tab.
- Select the select individual test button and select the following tree structure consecutively:
- Body
- Electrical system
- 01 - OBD-capable systems
- 6C - peripheral camera control module | J928
- 6C - peripheral camera control module, functions
- 6C - Calibration, (Repair Group 91)
From here, the Vehicle Diagnostic Tester advances the calibration procedure forward.
WARNING:
Make sure light does not reflect off the -VAS6350A/6.
Reflections affect the camera and may make it impossible to perform the calibration.
Reflections affect the camera and may make it impossible to perform the calibration.