PINPOINT TEST I : The Front Control Display Interface Module (FCDIM) Does Not Respond To The Diagnostic Scan Tool: Notes
WARNING: This page is about a different car, the 2016 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
Refer to Module Communications Network for schematic and connector information.
Refer to Audio System/Navigation - With SYNC Without Touchscreen for schematic and connector information.
Normal Operation and Fault Conditions
The FCDIM communicates with the diagnostic scan tool through the HS-CAN. The IPC is used as the gateway module.
Visual Inspection and Diagnostic Pre-checks
Verify BCM fuse 9 (10A) is OK.