Overview - Control Module For Adaptive Cruise Control

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2021 Audi S8, 2021 Audi A8 e Quattro, 2021 Audi A8 Quattro, 2020 Audi S8, and 2020 Audi A8 e Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Control Module For Adaptive Cruise Control

Courtesy of AUDI OF AMERICA, LLC

Mount
- For Laser Distance Regulation Control Module -J1122-
- Removing and Installing. Refer to ADJUSTER FOR Laser Distance Regulation Control Module -J1122-, REMOVING AND INSTALLING .
Right Washer Nozzle
- For Laser Distance Regulation Control Module -J1122-
- Overview - Auxiliary Washer System. Refer to OVERVIEW - HEADLAMP WASHER SYSTEM
Bolt
- Quantity: 2
- Tightening specification -Item ) Bolt
Bolt
- 2.5 Nm
- Quantity: 3
Retaining Plate
- Removing and Installing. Refer to RETAINING PLATE FOR CONTROL MODULE FOR ADAPTIVE CRUISE CONTROL -J428-, REMOVING AND INSTALLING .
Clip
- Open version
- Cannot be removed without being damaged
Clip
- Open version
- Cannot be removed without being damaged
Clip
- Closed version
- Cannot be removed without being damaged
- Note the installation position
Stud Bolt
- Note the adjustment dimension. Refer to Installing - Measure the dimension -a- at all stud bolts using the Digital Caliper: VAS6335 and correct if necessary. .
- Quantity: 3
Clip
- Must be replaced when the stud bolt is removed
- Replacing. Refer to CLIPS FOR Control Module for Adaptive Cruise Control -J428-, REPLACING .
- Quantity: 3
Control Module for Adaptive Cruise Control -J428-
- Removing and Installing. Refer to CONTROL MODULE FOR ADAPTIVE CRUISE CONTROL -J428-, REMOVING AND INSTALLING .
- Adjust the adaptive cruise control. Refer to ADAPTIVE CRUISE CONTROL (ACC), ADJUSTING .
Operating Lever for Adaptive Cruise Control
- Shared component with the steering column switch module. Cannot be replaced separately
- Removing and Installing. Refer to STEERING COLUMN SWITCH MODULE, REMOVING AND INSTALLING
Instrument Cluster
- With Instrument Cluster Control Module -J285-
Bolt
- Tightening specification -Item ) Bolt
Adjuster
- Removing and Installing. Refer to ADJUSTER FOR Laser Distance Regulation Control Module -J1122-, REMOVING AND INSTALLING .
- Note the adjustment dimension. Refer to Installing - .
Spring
Washer Fluid Hose
- From the window washer pump
Laser Distance Regulation Control Module -J1122-
- Removing and Installing. Refer to Laser Distance Regulation Control Module -J1122-, REMOVING AND INSTALLING .
- Adjust the adaptive cruise control. Refer to ADAPTIVE CRUISE CONTROL (ACC), ADJUSTING .
Connector
Bolt
- Tightening specification -Item ) Bolt
- Quantity: 2
Left Washer Nozzle
- For Laser Distance Regulation Control Module -J1122-
- Overview - Auxiliary Washer System. Refer to OVERVIEW - HEADLAMP WASHER SYSTEM
Bolt
- Tightening specification -Item ) Bolt
- Quantity: 2