ABS Control Module -J104- /ABS Hydraulic Unit -N55-, REMOVING AND INSTALLING: Notes

Special tools and workshop equipment required 

• Vehicle Diagnostic Tester
• Torque Wrench, 6-50Nm: VAG1331A 
• Open Ring Spanner Insert - AF 11mm: VAG1410/6 
• Torque Wrench - Universal Joint: VAG1410/7 
• Brake Pedal Actuator: VAG1869/2  .
• Bleeder bottle from the Brake Charger/Bleeder Unit: VAS5234 
• Engine Bung Set: VAS6122 
• Mini Torque Wrench: VAS6854 
• Safety Gloves

• If the ABS Control Module -J104- is faulty, it can be replaced separately.
• If the ABS Hydraulic Unit -N55- is faulty, it must be replaced together with the ABS Control Module -J104-.