LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 2019 >> RS 5 >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Warning Systems >> Communication [Coupe] >> 91 Communication >> Sound System >> Control Module/Digital Sound System Amplifier, Removing And Installing >> Control Module/Digital Sound System Amplifier, Removing And Installing, Coupe/SPORTBACK >> Removing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Control Module/Digital Sound System Amplifier, Removing And Installing, Coupe/SPORTBACK: Removing

-- Turn off the ignition and all electrical equipment and remove the ignition key.

-- Open the storage compartment on the left side of the luggage compartment.

The bracket with the Digital Sound System Control Module -J525- must be removed first.

-- Release and disconnect the connectors -1- from the Digital Sound System Control Module -J525- -2-.

GWWA91-12478Courtesy of AUDI OF AMERICA, LLC

-- Insert the : VAS6223/9  -1- onto the MOST bus connector -2-.

Fig 1: Fiber-Optic Cable Harness Connector And Protective Cap For Cable Connector VAS 6223/9
GWWA97-0760Courtesy of AUDI OF AMERICA, LLC

-- Remove the nuts -arrows- on the bracket and remove the Digital Sound System Control Module -J525- -2- with the bracket.

GWWA91-12478Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and remove the Digital Sound System Control Module -J525- -1- from the bracket -2-.

GWWA91-12479Courtesy of AUDI OF AMERICA, LLC