10.3 Peripheral Camera Control Module -J928-, Removing And Installing

The Peripheral Camera Control Module - J928- is located behind the left luggage compartment side trim panel.

NOTE: If replacing the control module, select the "Replace control module" function for the corresponding control module on the Vehicle Diagnostic Tester.

Removing

Turn off the ignition and all electrical equipment and remove the ignition key.
Remove the cover from the left luggage compartment side trim panel. Refer to Body Interior (Luggage Compartment Trim Panels; Overview - Luggage Compartment Side Trim Panel).
Release and disconnect the connectors -3-.
Push the catch -arrow- downward.
Remove the Peripheral Camera Control Module - J928- -1- to the center from the bracket -2-.

Installing

Install in reverse order of removal and note the following:

Perform the calibration. Refer to 10.7 Peripheral Camera (Calibrating).