Coolant Pump, Removing And Installing: Installing
WARNING: This page is about a different car, the 2020 Audi A3, 2019 Audi A3, and 2018 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and note the following:
- Replace the seal after removal.
- Secure all hose connections with hose clamps that match the ones used in series production. Refer to the Parts Information.
-- Connect the coolant hoses with the connector coupling. Refer to OVERVIEW - RADIATOR/RADIATOR FAN .
-- Install the coolant pump -1- and toothed belt.
-- Pay attention that the centering piece -arrows- and seal -3- are seated correctly.
-- Tighten the coolant pump bolts. Refer to Figure.
-- After installing a new coolant pump -2-, remove the protective cap -1- from the drive wheel.
Additional procedures depending on the model. Refer to COOLANT PUMP, REMOVING AND INSTALLING .