Specifications Index

SPECIFICATIONS INDEX

System			Specification/Procedure
Air Conditioning
Service			WORKING WITH A/C SERVICE STATION (1 Of 2)WORKING WITH A/C SERVICE STATION (2 Of 2)
Torque			Refer to the appropriate procedure in OVERVIEW - A/C COMPRESSOR POWER UNIT
Axle Nut/Hub Nut
Front			200 Nm +180°
Rear			200 Nm +180°
Battery			BATTERY
Brakes
Bleeding Sequence			HYDRAULIC SYSTEM
Disc Brakes			FRONT BRAKES REAR BRAKES
Torque			Refer to the appropriate procedures, Hydraulic Components HYDRAULIC SYSTEM Mechanical Components FRONT BRAKES / REAR BRAKES
Charging
Generator			GENERATOR
Torque			OVERVIEW - GENERATOR
Drive Belts
Adjustment
2.0L			RIBBED BELT, REMOVING AND INSTALLING
Belt Routing
		2.0L	OVERVIEW - CYLINDER BLOCK, BELT PULLEY SIDE
Engine Cooling
General Service Specifications			Refer to the appropriate FLUID CAPACITY TABLES information.
Radiator Cap Pressure
	Blue Cap		1.4 to 1.6 bar (20.30 to 23.20 psi)
	Black Cap		1.6 to 1.8 bar (23.2 to 26.1 psi)
Thermostat R & I
2.0L			COOLANT PUMP/COOLANT THERMOSTAT
Water Pump R & I
2.0L			COOLANT PUMP/COOLANT THERMOSTAT
Engine Mechanical
2.0L
		Compression	COMPRESSION, CHECKING
Oil Pressure			Oil pressure when the vehicle is idling: 0.85 to 1.6 bar (12.3 to 23.2 psi) Oil pressure at 2000 RPM: 1.2 to 1.6 bar (17.4 to 23.2 psi) Oil pressure at 3, 700 RPM: 1.2 to 1.6 bar (17.4 to 23.2 psi)
Overhaul			ENGINE ASSEMBLY
Torque			ENGINE, INSTALLING
Fluid Specifications			See FLUIDS under MAINTENANCE tab.
Engine Oil Drain Plug			30Nm
Flywheel/Flex Plate Torque			60 Nm + 90°
Fuel System
Fuel Pressure Test Procedure
	2.0L and 3.0L		Transfer Fuel Pump -G6-, CHECKING
Ignition
Firing Order & Cylinder Identification			FIRING ORDER & CYLINDER IDENTIFICATION
Spark Plug
2.0L			06K 905 601 D
Starting
Starter			STARTER
Torque			OVERVIEW - STARTER
Wheel Alignment
Adjustment Specifications			AXLE ALIGNMENT
Torque			N/A
Wheel & Tire
Wheel Lug Nut Torque			140 Nm