Laser Distance Regulation Control Module -J1122-, REMOVING AND INSTALLING: Installing
WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Check the connector for damage, contact corrosion and water leak, if necessary service. Refer to WIRING HARNESSES AND CONNECTORS, REPAIRING .
-- Align the Laser Distance Regulation Control Module -J1122-. Refer to LASER SENSOR (Laser Distance Regulation Control Module -J1122-), ADJUSTING .