Peripheral Camera Control Module -J928-, REMOVING AND INSTALLING: Removing

• Component location. Refer to COMPONENT LOCATION OVERVIEW - SENSORS AND CONTROL MODULES IN CENTER SECTION OF VEHICLE .

-- Move the right front seat in the rearmost highest position.

-- Remove the expanding rivets -1 and 2-.

Courtesy of AUDI OF AMERICA, LLC

-- Push the cover -3- slightly forward in direction of -arrow- and remove.

-- Release the catch in direction of -arrow- and remove the Peripheral Camera Control Module -J928- -5- from the bracket -4-.

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector -1- and antenna wires -2 and 3-.